NOTE:Before you begin to install ,please check the film carefully,if you find any creases,tears or other defects,please contact us immediately for advice.Don¡¯t remove the backing sheet or attempt to fit your film if you think it is faulty.We are unable to accept returns or provide refunds if installation has been attempted.
INSTALL TOOLS:A plant spray bottle and a small quantity of washing up liquid,sharp scissors,a sharp knife or blade,a tape measure and paper towels.
Step 1. A clean window is vital a successful installation,so keep Window or Glass clean.
Step 2. Use your spray bottle to cover the entire surface of the film with soapy water.
This allows the film to be manoeuvred into place.
Step 3. Remove the clear backing sheet from Film .Use your spray bottle to cover the entire surface of the film with soapy water.
This helps to prevent the film becoming tangled and sticking to itself.
Step 4. Pick up your film and apply to your window( Please MAKE SURE you have removed it before you apply the window film to glass).
The soapy water solution on the film and the glass will allow you to slide it into correct position.
Step 5. Use your squeegee to push out any water and air bubbles.Use your sharp blade to carefully trim the excess film at the edges,using the window frame as a guide.
Step 6. And repeat the squeegee process,using the squeegee to push any remaining moisture or bubbles to the edge of the window.Much easier than Wall Decals, it's no problem for you!
Step 7. Finally use the paper towels to dry the window and the frame,being carefully not to lift the film at the edges or corners.
Enjoy your works!
HOHO Blackout Film 0% Visible Light Transmission Opaque Black Privacy Glass Window Tint Stickers 50cmx200cm - B074P5RPGQ